EPDM Installation
Providing EPDM Installation Services to Virginia and North Carolina
EPDM Installation
EPDM (Ethylene Propylene Diene Monomer) roofing rises as a leading preference for flat and low-slope roofs, showcasing notable endurance, adaptability, and weather resilience.
The Roofing Solutions comprehensive guide to EPDM installation lays out the steps to properly install EPDM membrane. We’ve provided this guide so that you can make an educated decision when hiring a professional roofing contractor.
Here’s our step-by-step guide on the process of installing EPDM roofing membrane:
The Roofing Solutions Guide To EPDM Roof Installation
Preparation and Safety
1. Assessment: Evaluate the roof structure and substrate to ensure it’s suitable for EPDM roofing installation. Repair any damaged areas and ensure the substrate is clean, smooth, and dry.
2. Safety Measures: Use appropriate personal protective equipment (PPE) such as gloves, safety glasses, and non-slip footwear. If working at heights, use fall protection gear.
Materials and Tools
1. EPDM Roofing Material: Purchase EPDM roofing membrane sheets of the appropriate thickness and size for your project.
2. Adhesives and Sealants: Acquire EPDM roofing adhesive, seam tape, and sealant recommended by the manufacturer.
3. Tools: Gather tools including a utility knife, measuring tape, chalk line, roofing nails or screws, screw gun, seam roller, and a heat gun (if heat welding is required).
Installation Process
1. Measure and Plan: Measure the roof area accurately to determine the quantity and size of EPDM roofing membrane sheets needed. Plan the layout to minimize waste and ensure proper drainage.
2. Prepare Substrate: Clean the roof deck thoroughly to remove dirt, debris, and any existing roofing material. Repair any damaged areas and ensure the substrate is dry and smooth.
3. Apply Adhesive: Apply EPDM roofing adhesive to the clean substrate using a trowel or roller. Spread the adhesive evenly across the surface, ensuring full coverage.
4. Install Roofing Membrane:
a. Roll out the EPDM roofing membrane sheets onto the adhesive, starting from one edge of the roof and working towards the other.
b. Ensure the membrane is positioned accurately and smooth out any wrinkles or air bubbles.
c. Overlap the edges of adjacent sheets according to the manufacturer’s recommendations, typically 2-3 inches for seams.
d. Use a seam roller to press down on the seams and ensure a tight seal.
e. If heat welding is required for seam sealing, use a heat gun to carefully heat and weld the seams together.
5. Secure Edges and Seams:
a. Secure the edges of the roofing membrane using roofing nails or screws along the perimeter of the roof.
b. Apply EPDM roofing sealant along the edges and seams to further reinforce the waterproofing.
6. Install Flashing and Accessories:
a. Install flashing around roof penetrations such as vents, chimneys, and skylights to prevent water infiltration.
b. Seal around flashing and other penetrations using EPDM roofing sealant.
7. Finish and Inspect:
a. Inspect the installed EPDM roofing for any visible defects, loose seams, or areas that may require additional sealing.
b. Clean up any debris or waste materials from the roof and surrounding areas.
Repairing Larger Areas
1. Regular Inspections: Regularly inspect your EPDM roof for signs of wear or damage, especially after severe weather conditions. Make sure to have inspections done by licensed roofing contractors.
2. Manufacturer’s Instructions: Always follow the specific instructions and recommendations provided by the EPDM membrane manufacturer for the best results.
3. Avoid Walking on the Roof: Minimize foot traffic on your EPDM roof to prevent unnecessary wear and tear.
Expert EPDM Installation
If you’re uncertain about any aspect of the installation process or if the roof is complex, consider consulting with a professional roofing contractor.
Professional contractors have the expertise and experience to ensure the EPDM roofing is installed correctly and meets industry standards, while providing affordable cost.
At RSI, we have extensive knowledge and experience installing EPDM membranes. Reach out to us at (434) 432-4602 or fill out this form so that we can help you with your EPDM needs.
Ready To Take The Next Steps?
Fill Out The Form Below To Receive Your Free Estimate!
Contact Us Today!
Don't Take Our Word for It...
Let Our Work Speak for Itself!
Carlisle's Perfection Award
Carlisle's Perfection Award is presented to roofing applicator's with roof installation warranty claims that rank in the top 5% of all US and Canada. This shows the awarded applicators are providing exceptional service, and the installed roofs rarely are filed for a claim, ensuring customers they are working with a top-of-the line roofing company.
Carlisle's Perfection Council
Carlisle's Perfection Council chooses the most prestigious and highly rated roofing applicators to serve on an advisory board, which provides support roofing installers across the nation. This ensures applicator's are installing the highest quality roofing materials.
Carlisle's Execellence in Single-Ply
The Excellence in Single-Ply (ESP) award is deemed as one of the most prestigious awards in the roofing industry, assuring customers they are working with the most qualified and expert roofers.
Carlisle's Centurion Applicator
The Centurion Applicator award is presented to a roofing company that has achieved 100 'perfect 10' roof installs, meaning that an inspector gave a perfect score of '10' applying new roof systems.