Commercial Metal Installation

Providing Commercial Metal Installation to Virginia and North Carolina

Commercial Metal Installation

Installing corrugated metal roofing on commercial buildings is a durable and cost-effective solution for long-term protection against the elements.

Corrugated metal roofing offers excellent resistance to extreme weather conditions, is relatively lightweight, and can provide significant energy savings.

Here’s the Roofing Solutions guide on how to install corrugated metal roofing on commercial buildings, step by step:

The Roofing Solutions Guide To Installing Commercial Metal Roofing

Preparation and Planning

1. Measurements: Accurately measure the roof to determine the amount of material needed. Consider adding a margin for errors or adjustments.

2. Materials: Purchase corrugated metal panels, fasteners (typically screws), flashing, and sealant. Choose materials suitable for your specific climate and building codes.

3. Tools: Prepare the necessary tools, including a drill, screwdriver bits, tape measure, metal snips, and safety equipment.

Safety Measures

1. Personal Protective Equipment (PPE): Wear appropriate personal protective equipment, including gloves, safety glasses, and sturdy boots.

2. Secure Footing: Use scaffolding, ladders, or safety harnesses to ensure secure and safe access to the roof.

Removing Old Roofing (if applicable)

1. Remove Existing Roofing: Carefully remove any existing roofing material and dispose of it according to local regulations.

2. Inspect Roofing: the roof deck for damage. Repair or replace any damaged wood or substrate before proceeding.

Installing Underlayment

1. Distribute Underlayment: Roll out and secure a water-resistant underlayment over the roof deck as a secondary barrier against water infiltration.

2. Secure Underlayment: Ensure the underlayment is flat and properly secured to prevent wrinkles and bulges.

Installing Metal Panels

1. Start at the Bottom: Begin at the lowest part of the roof. Corrugated panels should be perpendicular to the roof’s edge.

2. Overlap: Panels should overlap by at least one corrugation. The side of each panel has an “under” and “over” side for this purpose.

3. Fastening: Secure the panels to the roof using screws and rubber washers to prevent water from seeping through the holes. Screws should be placed at the top of the corrugation, not in the valleys.

4. Sequential Installation: Continue adding panels, ensuring they are properly aligned and overlapped. Use a level or chalk line to maintain straight lines.

Flashing and Trim

Install flashing around roof features such as vents, chimneys, and along the edges where the roof meets a vertical surface. This helps direct water away from these vulnerable areas. Trim pieces can be added at corners, eaves, and ridges for improved aesthetics and extra protection against the elements.

Sealing and Finishing Touches

Apply sealant along edges, seams, and at any points where fasteners penetrate the panels to ensure a watertight seal. Inspect the entire roof to make sure all panels are securely fastened and that all overlaps and edges are properly sealed.

Regular Maintenance

Although corrugated metal roofing is low maintenance, regular inspections can help catch and rectify potential issues early, prolonging the life of the roof.

Top-Tier Commercial Metal Roofing

For large commercial projects or if you’re not experienced in roofing installations, it’s advisable to hire professional roofing contractors.

We are here to serve as your professional metal roofing installers. With our years of experience, we guarantee to provide the best service, all while giving you the lowest cost.

If interested, call us at (434) 432-4602 or fill out the form below. We will get in touch with you shortly!

Commercial Metal Installation

Providing Commercial Metal Installation to Virginia and North Carolina